|
Your download link is at the very bottom of the page... always. |
Processed through Paypal No account required. Donate Bitcoin to this wallet: 1KkUMXvQ2ko3xcJkzitB7WYgoW6m79WFfm Donate Ethereum to this wallet: 0x40E56922F43637224935CDC35e2c96E0392A8505 Donate Litecoin to this wallet: LLYAFEyqjH69gkyCEpRjXNyedRCWrVChfL |
| Files | ||||
| File Name | Rating | Downloads | ||
 |
NetStumbler v0.4.0 NetStumbler v0.4.0 NetStumbler is a tool for Windows that allows you to detect Wireless Local Area Networks (WLANs) using 802.11b, 802.11a and 802.11g. It has many uses: Verify that your network is set up the way you intended. Find locations with poor coverage in your WLAN. Detect other networks that might be causing interference with your network. Detect unauthorized "rogue" access points in your workplace. Help aim directional antennas for long-haul WLAN links. Use it recreationally for WarDriving. Requirements General Requirements The requirements for NetStumbler are somewhat complex and depend on hardware, firmware versions, driver versions and operating system. The best way to see if it works on your system is to try it. Some configurations have been extensively tested and are known to work. These are detailed at http://www.stumbler.net/compat. If your configuration works but is not listed, or is listed but does not work, please follow the instructions on the web site. The following are rules of thumb that you can follow in case you cannot reach the web site for some reason. This version of NetStumbler requires Windows 2000, Windows XP, or better. The Proxim models 8410-WD and 8420-WD are known to work. The 8410-WD has also been sold as the Dell TrueMobile 1150, Compaq WL110, Avaya Wireless 802.11b PC Card, and others. Most cards based on the Intersil Prism/Prism2 chip set also work. Most 802.11b, 802.11a and 802.11g wireless LAN adapters should work on Windows XP. Some may work on Windows 2000 too. Many of them report inaccurate Signal strength, and if using the "NDIS 5.1" card access method then Noise level will not be reported. This includes cards based on Atheros, Atmel, Broadcom, Cisco and Centrino chip sets. I cannot help you figure out what chip set is in any given card. Firmware Requirements If you have an old WaveLAN/IEEE card then please note that ... |
 |
4,962 | May 05, 2019 Marius Milner <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/NetStumbler1_th.png"border="0"> |
|
OpenSCAD v2023.12.20 OpenSCAD v2023.12.20 The Programmer's Solid 3D CAD Modeller OpenSCAD is software for creating solid 3D CAD objects. It is free software and available for Linux/UNIX, MS Windows and Mac OS X. About OpenSCAD OpenSCAD is software for creating solid 3D CAD models. It is free software and available for Linux/UNIX, Windows and Mac OS X. Unlike most free software for creating 3D models (such as Blender) it does not focus on the artistic aspects of 3D modelling but instead on the CAD aspects. Thus it might be the application you are looking for when you are planning to create 3D models of machine parts but pretty sure is not what you are looking for when you are more interested in creating computer-animated movies. OpenSCAD is not an interactive modeller. Instead it is something like a 3D-compiler that reads in a script file that describes the object and renders the 3D model from this script file. This gives you (the designer) full control over the modelling process and enables you to easily change any step in the modelling process or make designs that are defined by configurable parameters. OpenSCAD provides two main modelling techniques: First there is constructive solid geometry (aka CSG) and second there is extrusion of 2D outlines. Autocad DXF files can be used as the data exchange format for such 2D outlines. In addition to 2D paths for extrusion it is also possible to read design parameters from DXF files. Besides DXF files OpenSCAD can read and create 3D models in the STL and OFF file formats. This download is for the Windows 64bit version. All other download assets are below: Windows 32bit: OpenSCAD-2023.12.20-x86-32-Installer.exe macOS: OpenSCAD-2023.12.18.dmg Linux: OpenSCAD-2023.12.20.ai17852-x86_64.AppImage OpenSCAD-2023.09.11.ai-aarch64.AppImage Click here to visit the author's website. |
|
5,019 | Dec 21, 2023 Marius Kintel <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/OpenSCAD3_th.png"border="0"> |
 |
Scrollout F1 Scrollout F1 An easy-to-use anti-spam email gateway. Designed for Linux and Windows administrators without advanced email security experience. Its goal is to be as simple as possible. An easy to use, already adjusted email gateway (firewall) offering free anti-spam, anti-virus protection in order to secure all existing email servers, such as Microsoft Exchange, Lotus Domino, Postfix, Exim, Qmail and more. Basic deployment in no time: In order to start using this application you need to cover only two steps, described in this basic CONFIGURATION guide CONFIGURE An email gateway (a.k.a. firewall) is a machine (physical or virtual) installed between Internet and the email server. Its primary role is to protect the email server by filtering incoming messages, via SMTP protocol, from Internet. Secondary, an email gateway may be used as an outgoing gateway in case you want to add some new email features which are not provided by older email servers. For instance, Exchange 2000 or 2003 has no DKIM signing and verification service - a quality improvement for message delivery. In order to start using this application you need to cover only the two steps of BASIC CONFIGURATION (points 1.1 and 1.2 below). 1. Basic configuration 1.1 CONNECT Set the network connection: IP address, subnet mask, gateway and DNS. 1.2 TRAFFIC You need to mention your domains and the responsible email server for each domain. Each domain must be unique, but the servers can have same value in case you are using one email server for multiple domains. The gateway system will become responsible for receiving emails that are addressed to all domains mentioned in this page and will forward the messages to the email servers. Optionally, in case you want ... |
|
3,917 | Jun 08, 2021 Marius Gologan <img src="https://www.oldergeeks.com/downloads/gallery/thumbs/Scrollout F1_th.png"border="0"> |
| Showing rows 1 to 3 of 3 | Showing Page 1 of 1 | 1 |
OlderGeeks.com Copyright (c) 2024
